Below you can download canon mx490 windows 11 driver for Windows.
File name: canon-mx490-win11.exe
Version: 8.367
File size: 43221 MB
Upload source: manufactuter website
Antivirus software passed: Kaspersky ver. 2.70
Canon Mx490 Driver Windows 11(click above to download)
Device Specification:
- Manufacturer: Canon
- Model: MX490
- Compatibility: Windows 11
- Driver: Canon MX490 Driver
Troubleshooting Questions and Answers:
1. Question: Why is my Canon MX490 printer not responding after installing the driver on Windows 11?
Answer: There could be several reasons for the printer not responding. Ensure that the printer is turned on and properly connected to the computer. Double-check if the driver installed is compatible with Windows 11 and try reinstalling it. Additionally, check the printer's status and make sure it is set as the default printer in the computer's settings.
2. Question: How do I resolve paper jam issues in the Canon MX490 printer?
Answer: If you encounter a paper jam, follow these steps to resolve the issue:
- Turn off the printer and unplug it from the power source.
- Open all the printer covers to access the paper path.
- Gently remove any jammed paper, taking care not to tear it.
- Close all the printer covers properly.
- Plug in the printer and turn it back on.
- Try printing a test page to ensure the issue is resolved.
3. Question: What to do when my Canon MX490 printer is displaying "Low Ink" even after replacing it with a new cartridge?
Answer: If your printer is showing low ink even with a fresh cartridge, try the following steps to troubleshoot:
- Remove the cartridge and make sure it is inserted correctly.
- Ensure the ink cartridge's protective tape or seal has been removed completely.
- Clean the cartridge contacts to eliminate any dirt or residue.
- Restart the printer and check if the low ink message persists.
- If the issue persists, you may need to contact Canon support for further assistance or consider replacing the cartridge with a genuine Canon ink cartridge.