Below you can download ft232r usb uart driver for Windows.
File name: ft232r-usb-uart.exe
Version: 2.336
File size: 17.69 MB
Upload source: other website
Antivirus software passed: Avira ver. 3.50
Ft232R Usb Uart Driver Download(click above to download)
Device Specification:
- Device Name: Ft232R Usb Uart Driver
- Driver Type: USB UART Driver
- Purpose: Facilitates communication between a USB port and UART (Universal Asynchronous Receiver/Transmitter) serial interfaces
- Compatibility: Compatible with various operating systems, including Windows, macOS, Linux, and Android.
- Interface: USB (Universal Serial Bus)
- Data Rate: Supports data transfer rates up to 3Mbps
- Connector: USB-A (Type-A)
- Supported UART Signals: TXD, RXD, RTS, and CTS
- Input Voltage: 5V
- Supported Protocols: UART, RS232, RS485, and others
- Driver Availability: Drivers can be downloaded from the official website or manufacturer's support page.
Troubleshooting Questions and Answers:
1. Q: Why is my Ft232R USB UART not recognized by my computer?
A: There could be several reasons for this issue. First, ensure that you have installed the appropriate drivers for your operating system. Try reconnecting the USB cable, making sure it is securely plugged in. If the problem persists, try using a different USB port or cable to check for any physical connectivity issues. Restarting your computer might also help resolve the problem.
2. Q: How can I fix communication errors when using the Ft232R USB UART driver?
A: When experiencing communication errors, it is important to ensure that all the settings, such as baud rate, data bits, stop bits, and parity, are correctly configured in your communication software or terminal emulator. Verify that the device is connected to the correct UART interface and there are no loose connections. If using an RS232 or RS485 interface, check if any termination resistors are required. Lastly, try reinstalling the drivers or updating to the latest version provided by the manufacturer.
3. Q: Why is my Ft232R USB UART driver not transmitting or receiving data?
A: If the device is not transmitting or receiving data, check if any flow control settings (such as RTS/CTS) are properly configured or enabled. Ensure that the connected UART device or peripheral is actively transmitting data. Verify the integrity of the USB and UART cables for any damages. If applicable, check the power supply to the device and ensure it's receiving the required voltage. Lastly, try testing the device on a different computer to rule out any potential hardware-related issues.