Hi everyone,
I've been searching high and low for the driver for my Zebra Gx420T printer, but I've had no luck so far. I've tried visiting the official Zebra website and their support section, but I couldn't find a direct link to download the driver for this specific model. I even tried searching on popular driver download websites, but again, no success. Could someone here please provide me with a reliable source or a direct link to download the driver for the Zebra Gx420T printer? Your assistance would be greatly appreciated.
Download Driver Zebra Gx420T
Re: Download Driver Zebra Gx420T
Below you can download zebra gx420t driver for Windows.
File name: zebra-gx420t.exe
Version: 9.513
File size: 14642 MB
Upload source: manufactuter website
Antivirus software passed: McAfee version 5.14
Download Driver Zebra Gx420T
(click above to download)
Device Specifications:
- Model: Zebra Gx420T
- Printer Type: Thermal transfer
- Print Technology: Direct thermal
- Print Speed: Up to 6 inches per second
- Resolution: 203 dpi (8 dots/mm)
- Maximum Print Width: 4.09 inches (104 mm)
- Maximum Print Length: 39 inches (991 mm)
- Media Types: Continuous and die-cut labels, receipt paper, wristbands, and tags
- Connectivity: USB, Serial, and Ethernet
- Compatibility: Windows, Mac, and Linux
Troubleshooting Questions and Answers:
Q1: Why is my Zebra Gx420T printer not printing?
A1: There could be several reasons for this issue. First, ensure that the printer is connected properly to the power source and the computer. Check if there is any error message displayed on the printer's screen or the computer. Also, check if the correct printer driver is installed. If the issue persists, try restarting the printer and computer, or contact Zebra customer support for further assistance.
Q2: How do I calibrate the Zebra Gx420T printer?
A2: To calibrate the printer, follow these steps:
1. Load a few labels into the printer.
2. Turn off the printer.
3. Press and hold the feed button on the front panel of the printer.
4. While holding the feed button, turn on the printer.
5. Release the feed button only when the status light flashes, indicating the printing of configuration labels.
6. Once the labels are printed, press the feed button to advance the labels and complete the calibration. The printer is now calibrated.
Q3: Why is my Zebra Gx420T printer showing a "Ribbon Out" error?
A3: The "Ribbon Out" error indicates that the printer's ribbon is not installed correctly or is empty. To troubleshoot this issue, follow these steps:
1. Open the printer's top cover and ensure that the ribbon is properly loaded and threaded.
2. Check if the ribbon roll is empty and replace it if required.
3. Make sure that the ribbon sensor is clean and not blocked by any debris.
4. Close the printer's top cover securely.
If the error persists, try restarting the printer or contact Zebra customer support for further assistance.
File name: zebra-gx420t.exe
Version: 9.513
File size: 14642 MB
Upload source: manufactuter website
Antivirus software passed: McAfee version 5.14
Download Driver Zebra Gx420T
(click above to download)
Device Specifications:
- Model: Zebra Gx420T
- Printer Type: Thermal transfer
- Print Technology: Direct thermal
- Print Speed: Up to 6 inches per second
- Resolution: 203 dpi (8 dots/mm)
- Maximum Print Width: 4.09 inches (104 mm)
- Maximum Print Length: 39 inches (991 mm)
- Media Types: Continuous and die-cut labels, receipt paper, wristbands, and tags
- Connectivity: USB, Serial, and Ethernet
- Compatibility: Windows, Mac, and Linux
Troubleshooting Questions and Answers:
Q1: Why is my Zebra Gx420T printer not printing?
A1: There could be several reasons for this issue. First, ensure that the printer is connected properly to the power source and the computer. Check if there is any error message displayed on the printer's screen or the computer. Also, check if the correct printer driver is installed. If the issue persists, try restarting the printer and computer, or contact Zebra customer support for further assistance.
Q2: How do I calibrate the Zebra Gx420T printer?
A2: To calibrate the printer, follow these steps:
1. Load a few labels into the printer.
2. Turn off the printer.
3. Press and hold the feed button on the front panel of the printer.
4. While holding the feed button, turn on the printer.
5. Release the feed button only when the status light flashes, indicating the printing of configuration labels.
6. Once the labels are printed, press the feed button to advance the labels and complete the calibration. The printer is now calibrated.
Q3: Why is my Zebra Gx420T printer showing a "Ribbon Out" error?
A3: The "Ribbon Out" error indicates that the printer's ribbon is not installed correctly or is empty. To troubleshoot this issue, follow these steps:
1. Open the printer's top cover and ensure that the ribbon is properly loaded and threaded.
2. Check if the ribbon roll is empty and replace it if required.
3. Make sure that the ribbon sensor is clean and not blocked by any debris.
4. Close the printer's top cover securely.
If the error persists, try restarting the printer or contact Zebra customer support for further assistance.
Re: Re: Download Driver Zebra Gx420T
Thank you so much for sharing the link to the Windows driver for the Zebra Gx420T! I really appreciate your help.