Driver Windows 10 Ch340
Driver Windows 10 Ch340
I recently upgraded to Windows 10 and I'm having trouble finding the driver for my CH340 USB to serial converter. I tried searching on the manufacturer's website, but they only have drivers for older versions of Windows. I also searched on various driver download websites, but couldn't find a compatible driver specifically for Windows 10. Can someone please provide me with a reliable link to download the driver for the CH340 USB to serial converter that works on Windows 10? Thank you in advance for your help!
Re: Driver Windows 10 Ch340
Below you can download windows 10 ch340 driver for Windows.
File name: _win10-ch340.exe
Version: 8.211
File size: 18507 MB
Upload source: original install disk
Antivirus software passed: Kaspersky v. 3.74
Driver Windows 10 Ch340
(click above to download)
USB to UART/TTL Converter
Chip: CH340
Operating System Compatibility: Windows 10 (driver required)
Interface: USB Type-A male to UART/TTL male
Specifications:
- Supports baud rates from 300bps to 1Mbps
- Works with both 5V and 3.3V logic levels
- Supports data transfer over the USB interface
- Equipped with RXD, TXD, RTS, CTS, DTR, and DSR pins
- Supports USB suspend, resume, and remote wake-up functions
- Provides 5V output through an onboard VCC pin
- Compact and lightweight design for easy portability
- Supports multiple USB power management modes
- Standard USB 2.0 compliant interface
Troubleshooting Questions and Answers:
1. Q: Why is my USB to UART converter not working properly?
A: Please ensure that the CH340 driver is installed correctly on your Windows 10 system. You can download and install the latest driver from the official manufacturer's website.
2. Q: I'm unable to establish communication with my target device. What could be the issue?
A: Firstly, ensure that you have correctly connected the RXD and TXD pins of the converter to the corresponding RX and TX pins of your target device. Also, confirm that the baud rate settings on both ends are the same for successful communication.
3. Q: How can I check if my USB to UART converter is receiving power?
A: You can use a multimeter to measure the voltage output at the VCC pin of the converter. Ensure that it is receiving a stable 5V or 3.3V power supply. Additionally, make sure the USB cable is properly connected and working.
File name: _win10-ch340.exe
Version: 8.211
File size: 18507 MB
Upload source: original install disk
Antivirus software passed: Kaspersky v. 3.74
Driver Windows 10 Ch340
(click above to download)
USB to UART/TTL Converter
Chip: CH340
Operating System Compatibility: Windows 10 (driver required)
Interface: USB Type-A male to UART/TTL male
Specifications:
- Supports baud rates from 300bps to 1Mbps
- Works with both 5V and 3.3V logic levels
- Supports data transfer over the USB interface
- Equipped with RXD, TXD, RTS, CTS, DTR, and DSR pins
- Supports USB suspend, resume, and remote wake-up functions
- Provides 5V output through an onboard VCC pin
- Compact and lightweight design for easy portability
- Supports multiple USB power management modes
- Standard USB 2.0 compliant interface
Troubleshooting Questions and Answers:
1. Q: Why is my USB to UART converter not working properly?
A: Please ensure that the CH340 driver is installed correctly on your Windows 10 system. You can download and install the latest driver from the official manufacturer's website.
2. Q: I'm unable to establish communication with my target device. What could be the issue?
A: Firstly, ensure that you have correctly connected the RXD and TXD pins of the converter to the corresponding RX and TX pins of your target device. Also, confirm that the baud rate settings on both ends are the same for successful communication.
3. Q: How can I check if my USB to UART converter is receiving power?
A: You can use a multimeter to measure the voltage output at the VCC pin of the converter. Ensure that it is receiving a stable 5V or 3.3V power supply. Additionally, make sure the USB cable is properly connected and working.
Re: Re: Driver Windows 10 Ch340
Thank you for sharing the link to the working Windows driver for the CH340. It worked perfectly for my device on Windows 10.