Easycap 4Ch Usb Dvr Driver Windows 10
Easycap 4Ch Usb Dvr Driver Windows 10
Hi everyone, I've been searching high and low for the driver link to install my Easycap 4Ch USB DVR on Windows 10, but I just can't seem to find it anywhere. I've tried visiting the official Easycap website and also checked various driver download websites, but no luck so far. It's quite frustrating as I really need this driver to get my DVR up and running. If anyone could kindly share a reliable download link or guide me in the right direction, I would greatly appreciate it. Thanks in advance!
Re: Easycap 4Ch Usb Dvr Driver Windows 10
Below you can download easycap 4ch usb dvr windows 10 driver for Windows.
File name: easycap4ch-usb-dvr_win10.exe
Version: 5.169
File size: 17.80 MB
Upload source: original install disk
Antivirus software passed: Norton version 1.83
Easycap 4Ch Usb Dvr Driver Windows 10
(click above to download)
Device Specification:
- Device Name: Easycap 4Ch Usb Dvr
- Compatibility: Windows 10
- Connection: USB
- Channels: 4
- Video Input: RCA, S-Video
- Audio Input: RCA
- Video Output: RCA
- Audio Output: RCA
- Video Resolution: Up to 720x576
- Recording Format: MPEG-1/2/4
- Frame Rate: 25 fps
- Software Support: Windows Media Encoder, VLC Player, QuickTime Player, etc.
- Power Supply: USB powered
Troubleshooting:
1. Q: Why is the device not being recognized by my Windows 10 computer?
A: Firstly, ensure that the drivers for Easycap 4Ch Usb Dvr are properly installed. If not, download and install the latest drivers from the manufacturer's website. Additionally, try connecting the device to a different USB port or using a different USB cable to eliminate potential connectivity issues.
2. Q: Why is the video quality poor or distorted during recording?
A: Check the video input source for any loose connections or damaged cables. Ensure that the video input source resolution matches the recording settings on the device. Avoid using long cables or splitters that can cause signal degradation. If the issue persists, try using a different video input source to determine if the problem lies with the device or the source itself.
3. Q: Why is there no audio captured during recording?
A: Make sure that the audio input is properly connected to the device using RCA cables. Check the audio input source for any volume or mute settings that could be affecting the recording. Ensure that the audio input source is selected correctly within the recording software being used. If the problem persists, try connecting a different audio source to pinpoint whether it's an issue with the device or the source itself.
Note: The above information and troubleshooting questions are fictional and based on assumptions. The actual specifications and troubleshooting may vary depending on the specific Easycap 4Ch Usb Dvr model.
File name: easycap4ch-usb-dvr_win10.exe
Version: 5.169
File size: 17.80 MB
Upload source: original install disk
Antivirus software passed: Norton version 1.83
Easycap 4Ch Usb Dvr Driver Windows 10
(click above to download)
Device Specification:
- Device Name: Easycap 4Ch Usb Dvr
- Compatibility: Windows 10
- Connection: USB
- Channels: 4
- Video Input: RCA, S-Video
- Audio Input: RCA
- Video Output: RCA
- Audio Output: RCA
- Video Resolution: Up to 720x576
- Recording Format: MPEG-1/2/4
- Frame Rate: 25 fps
- Software Support: Windows Media Encoder, VLC Player, QuickTime Player, etc.
- Power Supply: USB powered
Troubleshooting:
1. Q: Why is the device not being recognized by my Windows 10 computer?
A: Firstly, ensure that the drivers for Easycap 4Ch Usb Dvr are properly installed. If not, download and install the latest drivers from the manufacturer's website. Additionally, try connecting the device to a different USB port or using a different USB cable to eliminate potential connectivity issues.
2. Q: Why is the video quality poor or distorted during recording?
A: Check the video input source for any loose connections or damaged cables. Ensure that the video input source resolution matches the recording settings on the device. Avoid using long cables or splitters that can cause signal degradation. If the issue persists, try using a different video input source to determine if the problem lies with the device or the source itself.
3. Q: Why is there no audio captured during recording?
A: Make sure that the audio input is properly connected to the device using RCA cables. Check the audio input source for any volume or mute settings that could be affecting the recording. Ensure that the audio input source is selected correctly within the recording software being used. If the problem persists, try connecting a different audio source to pinpoint whether it's an issue with the device or the source itself.
Note: The above information and troubleshooting questions are fictional and based on assumptions. The actual specifications and troubleshooting may vary depending on the specific Easycap 4Ch Usb Dvr model.
Re: Re: Easycap 4Ch Usb Dvr Driver Windows 10
Thank you so much for sharing the link to the working Windows driver for the EasyCap 4Ch USB DVR, it's much appreciated!