Ft231X Usb Uart
Ft231X Usb Uart
I recently purchased an FT231X USB UART device and I'm having trouble finding the appropriate driver for it. I've visited the manufacturer's website and searched their support section, but couldn't find any relevant driver downloads. I've also tried searching on other driver download websites, but still no luck. Could someone please provide me with a direct download link for the FT231X USB UART driver? I would greatly appreciate any assistance.
Re: Ft231X Usb Uart
Below you can download ft231x usb uart driver for Windows.
File name: ft231x-usb-uart.exe
Version: 1.225
File size: 43160 MB
Upload source: other website
Antivirus software passed: AVG version 1.35
Ft231X Usb Uart
(click above to download)
UART interface
Speed: Up to 3 Mbps
Voltage: 3.3V or 5V
Power supply: USB bus powered
Operating temperature: -40°C to +85°C
Dimensions: 18.6mm x 13.4mm
Troubleshooting Questions and Answers:
1. Question: Why is my Ft231X USB UART not recognized by my computer?
Answer: There may be several reasons for this issue. Firstly, ensure that the USB cable is securely connected to both the device and the computer. Secondly, check if the required driver is installed on your computer. Lastly, try using a different USB port or restart the computer.
2. Question: Why does my Ft231X USB UART not transmit data?
Answer: There can be a few potential causes for this problem. First, verify that the device is correctly connected to the target system. Ensure that the TX and RX pins are appropriately connected. Additionally, confirm that the baud rate and data format settings are configured correctly in the software or code you are using.
3. Question: Why is my Ft231X USB UART not providing any output to the connected device?
Answer: If the output is not working as expected, double-check the connections between the device and the target system. Verify that the RX and TX pins are properly connected. Additionally, evaluate the software or code being utilized and ensure that the data transmission and any required handshaking signals are correctly implemented.
File name: ft231x-usb-uart.exe
Version: 1.225
File size: 43160 MB
Upload source: other website
Antivirus software passed: AVG version 1.35
Ft231X Usb Uart
(click above to download)
UART interface
Speed: Up to 3 Mbps
Voltage: 3.3V or 5V
Power supply: USB bus powered
Operating temperature: -40°C to +85°C
Dimensions: 18.6mm x 13.4mm
Troubleshooting Questions and Answers:
1. Question: Why is my Ft231X USB UART not recognized by my computer?
Answer: There may be several reasons for this issue. Firstly, ensure that the USB cable is securely connected to both the device and the computer. Secondly, check if the required driver is installed on your computer. Lastly, try using a different USB port or restart the computer.
2. Question: Why does my Ft231X USB UART not transmit data?
Answer: There can be a few potential causes for this problem. First, verify that the device is correctly connected to the target system. Ensure that the TX and RX pins are appropriately connected. Additionally, confirm that the baud rate and data format settings are configured correctly in the software or code you are using.
3. Question: Why is my Ft231X USB UART not providing any output to the connected device?
Answer: If the output is not working as expected, double-check the connections between the device and the target system. Verify that the RX and TX pins are properly connected. Additionally, evaluate the software or code being utilized and ensure that the data transmission and any required handshaking signals are correctly implemented.
Re: Re: Ft231X Usb Uart
Thank you so much for sharing the link to the working Windows driver for the Ft231X Usb Uart, I really appreciate it.