Instalar Driver Usb-Rs232 Windows 10
Instalar Driver Usb-Rs232 Windows 10
I've been trying to install a USB-RS232 driver for Windows 10, but I'm unable to find a reliable source for the driver. I've searched extensively on various websites and forums and even checked the manufacturer's website, but I couldn't locate the specific driver for Windows 10. Could someone please provide a direct download link for the USB-RS232 driver that is compatible with Windows 10? I would greatly appreciate any assistance with this issue.
Re: Instalar Driver Usb-Rs232 Windows 10
Below you can download instalar usb-rs232 windows 10 driver for Windows.
File name: instalar-usb-rs232_win10.exe
Version: 6.193
File size: 35156 MB
Upload source: manufactuter website
Antivirus software passed: Eset v 1.68
Instalar Driver Usb-Rs232 Windows 10
(click above to download)
Device Specification:
- Device Type: USB to RS232 Converter
- Compatibility: Windows 10
- Driver Installation: Required for proper functioning
- Interface: USB 2.0
- Max Data Transfer Rate: 115200 bps
- Supported RS232 Signals: RX, TX, RTS, CTS, DTR, DSR, DCD, RI, GND
- Power Source: USB port
- Operating Temperature: 0°C to 60°C
- Connector Type: USB Type-A male to DB9 male
Troubleshooting Questions and Answers:
Q1. Why isn't my device being recognized by Windows 10?
A1. Please ensure that the driver for the USB to RS232 converter is correctly installed. You can download the driver from the manufacturer's website and follow the installation instructions for Windows 10.
Q2. Why am I experiencing slow data transfer rates?
A2. Slow data transfer rates can occur due to various factors. Firstly, make sure that the USB port you are using supports high-speed data transfer (USB 2.0 or higher). Also, check the cable connection for any damage or looseness. If the issue persists, try connecting the device to a different USB port or restart your computer.
Q3. How do I troubleshoot if my RS232-connected device is not functioning?
A3. If your RS232-connected device is not functioning, start by checking the physical connection between the converter and the device. Ensure that the pins are aligned and there is no damage. Additionally, verify if the RS232 signals are properly wired and matched between the converter and the device. If necessary, you may also try using a different RS232 cable for testing.
File name: instalar-usb-rs232_win10.exe
Version: 6.193
File size: 35156 MB
Upload source: manufactuter website
Antivirus software passed: Eset v 1.68
Instalar Driver Usb-Rs232 Windows 10
(click above to download)
Device Specification:
- Device Type: USB to RS232 Converter
- Compatibility: Windows 10
- Driver Installation: Required for proper functioning
- Interface: USB 2.0
- Max Data Transfer Rate: 115200 bps
- Supported RS232 Signals: RX, TX, RTS, CTS, DTR, DSR, DCD, RI, GND
- Power Source: USB port
- Operating Temperature: 0°C to 60°C
- Connector Type: USB Type-A male to DB9 male
Troubleshooting Questions and Answers:
Q1. Why isn't my device being recognized by Windows 10?
A1. Please ensure that the driver for the USB to RS232 converter is correctly installed. You can download the driver from the manufacturer's website and follow the installation instructions for Windows 10.
Q2. Why am I experiencing slow data transfer rates?
A2. Slow data transfer rates can occur due to various factors. Firstly, make sure that the USB port you are using supports high-speed data transfer (USB 2.0 or higher). Also, check the cable connection for any damage or looseness. If the issue persists, try connecting the device to a different USB port or restart your computer.
Q3. How do I troubleshoot if my RS232-connected device is not functioning?
A3. If your RS232-connected device is not functioning, start by checking the physical connection between the converter and the device. Ensure that the pins are aligned and there is no damage. Additionally, verify if the RS232 signals are properly wired and matched between the converter and the device. If necessary, you may also try using a different RS232 cable for testing.
Re: Re: Instalar Driver Usb-Rs232 Windows 10
Thank you so much for sharing the link to the working Windows driver for the USB-RS232 device; I've been searching for this for ages and can't wait to try it out!