Pg348Q Driver
Pg348Q Driver
I've been searching everywhere for the driver for my Pg348Q monitor but I just can't seem to find it. I've checked the official ASUS website, as well as other driver database sites like DriverGuide and DriverFinder, but with no luck. Can anyone please provide me with a reliable link to download the driver? Your help would be greatly appreciated!
Re: Pg348Q Driver
Below you can download pg348q driver for Windows.
File name: pg348q.exe
Version: 9.255
File size: 42461 MB
Upload source: original install disk
Antivirus software passed: Panda ver. 5.85
Pg348Q Driver
(click above to download)
Specification:
- Model: PG348Q
- Driver Type: Display Driver
- Display Type: Ultrawide QHD LED-backlit IPS Display
- Screen Size: 34 inches
- Resolution: 3440 x 1440 pixels
- Aspect Ratio: 21:9
- Refresh Rate: 100Hz
- Response Time: 5ms (Gray to Gray)
- Color Gamut: sRGB 100%
- Contrast Ratio: 1000:1
- Brightness: 300 cd/m²
- Viewing Angles: 178° (H) / 178° (V)
- Connectivity: HDMI, DisplayPort, USB 3.0, Audio In/Out
- Ergonomics: Height Adjustment, Tilt, Swivel, VESA Mount Compatible
- Additional Features: G-Sync, GamePlus hotkey, Flicker-Free technology, Ultra-Low Blue Light technology
Troubleshooting Questions and Answers:
Q1: Why is my PG348Q not displaying any image?
A1: Firstly, ensure that all the necessary cables (HDMI/DisplayPort) are securely connected to both the monitor and the computer. Also, make sure the monitor is powered on and the input source is correctly selected. If the issue persists, try connecting the monitor to a different computer or replace the cable to determine if the problem lies with the monitor or the computer.
Q2: How do I enable G-Sync on my PG348Q?
A2: To enable G-Sync on the PG348Q, make sure your computer meets the system requirements for G-Sync and has an NVIDIA graphics card installed. Connect the monitor to the computer using DisplayPort, open the NVIDIA Control Panel, click on "Set up G-Sync" under the Display category, check the box that says "Enable G-Sync" and click Apply.
Q3: My PG348Q is not functioning properly after installing the latest driver. What should I do?
A3: If you encounter issues after installing a new driver, try uninstalling the current driver and performing a clean installation of the previous stable version. Ensure you download the correct driver for your operating system from the official ASUS website. It is also recommended to restart your computer after the installation process to ensure the changes take effect correctly.
File name: pg348q.exe
Version: 9.255
File size: 42461 MB
Upload source: original install disk
Antivirus software passed: Panda ver. 5.85
Pg348Q Driver
(click above to download)
Specification:
- Model: PG348Q
- Driver Type: Display Driver
- Display Type: Ultrawide QHD LED-backlit IPS Display
- Screen Size: 34 inches
- Resolution: 3440 x 1440 pixels
- Aspect Ratio: 21:9
- Refresh Rate: 100Hz
- Response Time: 5ms (Gray to Gray)
- Color Gamut: sRGB 100%
- Contrast Ratio: 1000:1
- Brightness: 300 cd/m²
- Viewing Angles: 178° (H) / 178° (V)
- Connectivity: HDMI, DisplayPort, USB 3.0, Audio In/Out
- Ergonomics: Height Adjustment, Tilt, Swivel, VESA Mount Compatible
- Additional Features: G-Sync, GamePlus hotkey, Flicker-Free technology, Ultra-Low Blue Light technology
Troubleshooting Questions and Answers:
Q1: Why is my PG348Q not displaying any image?
A1: Firstly, ensure that all the necessary cables (HDMI/DisplayPort) are securely connected to both the monitor and the computer. Also, make sure the monitor is powered on and the input source is correctly selected. If the issue persists, try connecting the monitor to a different computer or replace the cable to determine if the problem lies with the monitor or the computer.
Q2: How do I enable G-Sync on my PG348Q?
A2: To enable G-Sync on the PG348Q, make sure your computer meets the system requirements for G-Sync and has an NVIDIA graphics card installed. Connect the monitor to the computer using DisplayPort, open the NVIDIA Control Panel, click on "Set up G-Sync" under the Display category, check the box that says "Enable G-Sync" and click Apply.
Q3: My PG348Q is not functioning properly after installing the latest driver. What should I do?
A3: If you encounter issues after installing a new driver, try uninstalling the current driver and performing a clean installation of the previous stable version. Ensure you download the correct driver for your operating system from the official ASUS website. It is also recommended to restart your computer after the installation process to ensure the changes take effect correctly.
Re: Re: Pg348Q Driver
Thank you so much for sharing the link to the working windows driver for the Pg348Q! I've been struggling to find a reliable source for it, and your post has been extremely helpful.