Hi everyone,
I recently upgraded my operating system to Windows 10 and it seems that my Qlogic Bcm5709C network adapter driver is not compatible with it. I have searched extensively online, including the official Qlogic website, various driver download websites, and even Windows Update, but I couldn't find a reliable source to download the driver. Any suggestions on where I can find a legitimate and updated driver for my Qlogic Bcm5709C network adapter that is compatible with Windows 10? Thanks in advance for your help!
Qlogic Bcm5709C Driver Download
Re: Qlogic Bcm5709C Driver Download
Below you can download qlogic bcm5709c driver for Windows.
File name: qlogic-bcm5709c.exe
Version: 3.175
File size: 44454 MB
Upload source: original install disk
Antivirus software passed: Panda v 2.80
Qlogic Bcm5709C Driver Download
(click above to download)
Device Specification:
Device: QLogic BCM5709C Network Interface Card
Manufacturer: QLogic Corporation
Model: BCM5709C
Interface: PCI Express (PCIe)
Data Transfer Rate: Gigabit Ethernet (10/100/1000 Mbps)
Protocol: TCP/IP
Supported Operating Systems: Windows, Linux, VMware ESXi
Compatibility: Compatible with 32-bit and 64-bit systems
Dimensions: Standard PCI form factor
Troubleshooting Questions and Answers:
1. Why is my QLogic BCM5709C NIC not being detected by my computer?
- Ensure that the card is securely inserted into the PCIe slot.
- Update the driver to the latest version from the official QLogic website.
- Check for any conflicts with other devices/drivers in Device Manager.
2. Why am I experiencing slow network speeds with my QLogic BCM5709C NIC?
- Check the Ethernet cable connections for any loose or damaged cables.
- Verify that the NIC is configured to operate at the correct speed (10/100/1000 Mbps).
- Perform a network bandwidth test to identify any bottlenecks in your network infrastructure.
3. Why does my QLogic BCM5709C NIC intermittently disconnect from the network?
- Ensure that the NIC is properly seated in the PCIe slot and that no physical damage is present.
- Update the NIC driver and firmware to the latest version.
- Disable power-saving features in the operating system and the NIC settings, as they may cause intermittent disconnections.
File name: qlogic-bcm5709c.exe
Version: 3.175
File size: 44454 MB
Upload source: original install disk
Antivirus software passed: Panda v 2.80
Qlogic Bcm5709C Driver Download
(click above to download)
Device Specification:
Device: QLogic BCM5709C Network Interface Card
Manufacturer: QLogic Corporation
Model: BCM5709C
Interface: PCI Express (PCIe)
Data Transfer Rate: Gigabit Ethernet (10/100/1000 Mbps)
Protocol: TCP/IP
Supported Operating Systems: Windows, Linux, VMware ESXi
Compatibility: Compatible with 32-bit and 64-bit systems
Dimensions: Standard PCI form factor
Troubleshooting Questions and Answers:
1. Why is my QLogic BCM5709C NIC not being detected by my computer?
- Ensure that the card is securely inserted into the PCIe slot.
- Update the driver to the latest version from the official QLogic website.
- Check for any conflicts with other devices/drivers in Device Manager.
2. Why am I experiencing slow network speeds with my QLogic BCM5709C NIC?
- Check the Ethernet cable connections for any loose or damaged cables.
- Verify that the NIC is configured to operate at the correct speed (10/100/1000 Mbps).
- Perform a network bandwidth test to identify any bottlenecks in your network infrastructure.
3. Why does my QLogic BCM5709C NIC intermittently disconnect from the network?
- Ensure that the NIC is properly seated in the PCIe slot and that no physical damage is present.
- Update the NIC driver and firmware to the latest version.
- Disable power-saving features in the operating system and the NIC settings, as they may cause intermittent disconnections.
Re: Re: Qlogic Bcm5709C Driver Download
Thank you so much for providing the link to the working windows driver for the Qlogic Bcm5709C, it's greatly appreciated!