Zebra Li4278 Windows 10 Driver
Zebra Li4278 Windows 10 Driver
I recently purchased a Zebra Li4278 barcode scanner, and I'm currently using it with Windows 10. However, I'm unable to find the driver for this device anywhere online. I've searched on the Zebra support website, as well as various other driver download websites, but without any luck. Could someone please provide me with a direct link to the Windows 10 driver for the Zebra Li4278 scanner? Any assistance would be greatly appreciated!
Re: Zebra Li4278 Windows 10 Driver
Below you can download zebra li4278 windows 10 driver for Windows.
File name: zebra-li4278_win10.exe
Version: 2.145
File size: 19.55 MB
Upload source: original install disk
Antivirus software passed: McAfee ver. 1.47
Zebra Li4278 Windows 10 Driver
(click above to download)
Device Specification:
- Model: Zebra Li4278
- Supported Operating System: Windows 10
- Device Type: Barcode scanner
- Connectivity: Bluetooth
- Scan Capability: 1D barcodes
- Maximum Scan Range: Up to 30 feet
- Battery Type: Rechargeable Lithium-ion
- Battery Life: Up to 72 hours on full charge
- Dimensions: 7.3 x 3 x 2.5 inches
- Weight: 7.9 ounces
Troubleshooting Questions and Answers:
1. Q: My Zebra Li4278 barcode scanner is not connecting to my Windows 10 device. What could be the issue?
A: Make sure both the scanner and the Windows 10 device have Bluetooth turned on and are in pairing mode. Also, ensure that the scanner is within the range of the device. If the problem persists, try resetting the scanner's Bluetooth connection by following the instructions in the user manual.
2. Q: The Zebra Li4278 barcode scanner is not scanning barcodes properly. What should I do?
A: Firstly, check if the scanner lens is clean and free from any smudges or debris. If not, clean it gently using a soft, lint-free cloth. Additionally, ensure that the scanner is positioned at an appropriate angle and is close enough to the barcode. If the issue persists, try resetting the scanner to its factory defaults or contact Zebra support for further assistance.
3. Q: My Zebra Li4278 barcode scanner's battery is not holding a charge as expected. What could be the problem?
A: Firstly, check if the battery contacts on the scanner and the charging cradle are clean and free from any dirt or corrosion. If necessary, clean them gently using a dry cloth. Make sure you are using the recommended charger and charging method provided by Zebra. If the battery still doesn't hold a charge, it might need replacement. Contact Zebra support or refer to the user manual for further guidance.
File name: zebra-li4278_win10.exe
Version: 2.145
File size: 19.55 MB
Upload source: original install disk
Antivirus software passed: McAfee ver. 1.47
Zebra Li4278 Windows 10 Driver
(click above to download)
Device Specification:
- Model: Zebra Li4278
- Supported Operating System: Windows 10
- Device Type: Barcode scanner
- Connectivity: Bluetooth
- Scan Capability: 1D barcodes
- Maximum Scan Range: Up to 30 feet
- Battery Type: Rechargeable Lithium-ion
- Battery Life: Up to 72 hours on full charge
- Dimensions: 7.3 x 3 x 2.5 inches
- Weight: 7.9 ounces
Troubleshooting Questions and Answers:
1. Q: My Zebra Li4278 barcode scanner is not connecting to my Windows 10 device. What could be the issue?
A: Make sure both the scanner and the Windows 10 device have Bluetooth turned on and are in pairing mode. Also, ensure that the scanner is within the range of the device. If the problem persists, try resetting the scanner's Bluetooth connection by following the instructions in the user manual.
2. Q: The Zebra Li4278 barcode scanner is not scanning barcodes properly. What should I do?
A: Firstly, check if the scanner lens is clean and free from any smudges or debris. If not, clean it gently using a soft, lint-free cloth. Additionally, ensure that the scanner is positioned at an appropriate angle and is close enough to the barcode. If the issue persists, try resetting the scanner to its factory defaults or contact Zebra support for further assistance.
3. Q: My Zebra Li4278 barcode scanner's battery is not holding a charge as expected. What could be the problem?
A: Firstly, check if the battery contacts on the scanner and the charging cradle are clean and free from any dirt or corrosion. If necessary, clean them gently using a dry cloth. Make sure you are using the recommended charger and charging method provided by Zebra. If the battery still doesn't hold a charge, it might need replacement. Contact Zebra support or refer to the user manual for further guidance.
Re: Re: Zebra Li4278 Windows 10 Driver
Thank you for sharing the link to the Zebra Li4278 Windows 10 driver, I appreciate the assistance!